Description
Elektrohydraulischer Aktor SCANIA EHCA FTE S2CP10.087A Kupplungsgeberzylinder Scania, Opticruise, vollautomatisch, Fahrzeug / Motortyp: LKW der P-, G-, R-, T-Serie (2003- )
Technische Daten
Betriebsmedium: Bremsflüssigkeit
Max. Betriebskraft: 6250N
Gewicht: 8,0kg
L x B x H: 330 x 160 x 265 mm
Umgebungstemperatur: -40°C bis +110°C
Betriebsspannung: 16 - 32V
Nennleistung: 350W
SCANIA 10572946
SCANIA 10572951
SCANIA 10574929
SCANIA 10574930
SCANIA 10574936
SCANIA 1849429
SCANIA 1931444
SCANIA 2023059
SCANIA 2037304
SCANIA 2082082
SCANIA 2290706
SCANIA 2392193
SCANIA 2441305
SCANIA 2450508
SCANIA 2475267
SCANIA 2612290
SCANIA 2612292
SCANIA 81307256123
MONTAGEHINWEIS:
EIN- UND AUSBAU DES ELEKTRO-HYDRAULISCHEN KUPPLUNGSAKTUATORS (EHCA)
Ausbau
1. Das Fahrzeug zur besseren Erreichbarkeit der Komponente entweder über eine Montagegrube stellen, oder anheben und mit Unterstellböcken sichern. Das Fahrzeug muß sicher stehen!
2. Zündung ausschalten!
3. Zur besseren Erreichbarkeit kann u. U. das Fahrerhaus gekippt und das Trittblech über dem Getriebe entfernt werden.
4. Die Verbindungsstecker am elektro-hydraulischen Kupplungsaktuator (EHCA) und am Vorratsbehälter abziehen.
5. Auspuffrohr, Halterungen, Dämmungen etc. demontieren, falls dadurch der Ausbau erleichtert wird.
6. Der EHCA kann mit drei oder auch mit vier Befestigungsschrauben druckbolzenseitig fixiert sein. Auf der Seite des Elektromotors (heckseitig) ist der EHCA mit einer Schraube befestigt. Diese Befestigungsschrauben nun lösen; die oberen zuerst.
7. EHCA ausbauen. Wichtig: Die Druckstange des EHCA kann am Kupplungshebel festhängen. Mit entsprechender Vorsicht lösen!
Einbau
1. Den Kugelkopf des EHCA, der im eingebauten Zustand am Kupplungshebel anliegt, leicht mit geeigneter Montagepaste einfetten.
2. EHCA einbauen. Wichtig: Darauf achten, daß die Druckstange richtig am Kupplungshebel anliegt. Hier vorsichtig per Hand etwas Gegendruck aufbringen und korrekte Lage ertasten.
3. Befestigungsschrauben am EHCA und am Kabelhalter eindrehen und festschrauben. Achtung: Das jeweilige Anzugdrehmoment nach Norm wählen.
4. Verbindungsstecker am EHCA und am Vorratsbehälter aufstecken.
5. Ggf. Auspuffrohr, Halterungen, Dämmungen etc. wieder montieren.
6. Mittels geeigneter Diagnosesoftware den Fehlerspeicher löschen und den Kupplungsaktuator kalibrieren, um vorzeitigen Kupplungsverschleiß zu vermeiden.
7. Motor starten und Gänge im Stand durchschalten. 8. Probefahrt durchführen.
9. Das System ist vorbefüllt und muß daher i. d. R. nicht entlüftet werden. Aufgrund längerer Lagerung der Komponente kann dies aber in Ausnahmefällen dennoch notwendig werden. Den Angaben des Fahrzeugherstellers ist dabei zu folgen.
Das System ist vorbefüllt. Wenn Bremsflüssigkeit nachgefüllt werden muß, darf nur DOT3 oder DOT4 verwendet werden. Alle weiteren Bremsflüssigkeiten sind nicht freigegeben. Dies würde bei der EHCA zu Fehlfunktion oder Ausfall führen!
Safety regulations
Manufacturer
Valeo Powertrain GmbH
Postfach 1180
D-96104 Ebern
Andreas-Humann-Str. 2
D-96106 Ebern
Tel. +49-9531-81-0
Fax +49-9531-81-3377
[email protected]
Vertreten durch die Geschäftsführung:
CEO: Harry Bätz
CFO: Rudy Chartrelle
Amtsgericht Bamberg, HRB 5892
USt.-ID: DE 356 981 241
Important safety instructions
Dear Customers,
To ensure the proper functioning and safety of our products, we ask that you read the following instructions carefully and follow them. These safety instructions are part of our commitment to comply with Regulation (EU) 2023/988 on general product safety and other relevant regulations.
1. Identifying and selecting the appropriate product
- Compatibility: Only use replacement parts with the same order number and from the same manufacturer as the part to be replaced. Check compatibility with the technical specifications and instructions provided by the vehicle or device manufacturer.
- No guarantee for product images: Please note that images are for guidance only and may differ from the actual product. The technical data, order number and manufacturer are decisive.
2. Installation and use
- Professional installation: Our products must be installed and used only by qualified and certified professionals.
- Follow instructions: Please follow all installation, operating and safety instructions from the device or vehicle manufacturer. Failure to do so may result in malfunctions, damage or serious safety risks.
- Intended use: Use the product only for its intended purpose and in accordance with the manufacturer's instructions.
3. Safety instructions
- Avoiding hazards: Improper installation or use can cause electrical damage, fire or injury. Ensure that the use by untrained persons, children or persons with limited abilities is excluded.
- No modifications: Any modifications or unauthorized repairs can affect the safety and warranty of the product.
4. Traceability and product liability
- Traceability: Each product has an order number (serial or batch number) that allows for clear identification. If you have any questions about the origin of the product, please contact our customer service.
- Product liability: Product liability lies with the respective manufacturer. Our role as a dealer is limited to the intended distribution within the EU.
- Disclaimer: We are not liable for damages resulting from improper installation or use.
5. Target group and restrictions on use
- For professionals only: Our products are intended exclusively for commercial use or for people with the appropriate specialist knowledge.
- Exclusion of private use: These products are not suitable for repair, installation, (use) by laypersons or for private individuals.
6. Data protection and recall actions
- Data protection: Your data is protected in accordance with the General Data Protection Regulation (GDPR) and used only for safety-related information such as recalls.
- Safety warnings: In the event of safety-related changes or recalls, you will be informed immediately. Please ensure that your contact details are up to date. Please create a customer account before ordering and enter the necessary data in the customer account yourself.
7. changes and errors
- Product information: All information about our products is for general information only and is subject to change without notice.
- Errors and omissions: Typing or printing errors are reserved and do not justify any claims for compensation.
Contact us if you have any questions or uncertainties
If you have any questions about a product or its installation, please contact our customer service. We are at your disposal at [email protected] or [email protected] or by phone at +43 2524 27800. If necessary, you can find the contact details for the manufacturer in the Safety Regulations tab for questions about the product, installation or questions.
Thank you for your trust in our products.
Best regards,
Your company
A. Pieringer Gesellschaft m.b.H.
Reviews
Be the first to review this item
There are no reviews yet